Getting Started With The Sb Scanner; Install Scanner Hardware - Digital Check SB 500 User Manual

Getting Started with the SB Scanner

Install Scanner hardware

a) Connect the USB cable (provided) to your computer and scanner. (Fig. 1)
b) Make sure the red warning label is removed before connecting this end to your computer.
c) You may need to reconnect the cable to another USB port on your computer if the scanner cannot be
detected. (Check your computer's user guide to identify other available USB ports and their locations.
Fig. 2
Once your scanner is connected to your computer, the "Found New Hardware Wizard" window will appear.
d)
Choose the "No. not this time" then click "Next". (Fig. 2)
Make sure you select the "Install the software automatically (Recommended)" option in the second screen
e)
that follows. (Fig. 3)
Fig. 1
Fig. 3
7
v061311