Advertisement
6
<4
Setting
m anually
7 - 18
<7
0,7
-
1,8
< 0,7
rn
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the
dishwasher.
'
3. Turn the
water
hardness
dial
to position
1 or 2
(see
chart)
.
4. Replace the
lower
basket.
Setting
electronically
rn
The dishwasher is factory set at
level
5.
1.
Press the
On/
Off button. The dishwasher
must be in setting mode.
2.
Press and keep pressed the programme
selection/
cancel button until programme
light
A flashes and programme
light
B
comes on
with
a fixed
light.
Wait until
pro-
gramme
light
B
goes off. The programme
Use of
dishwasher salt
ill
Warning!
Only use salt specifically designed for use
in
dishwashers. All other types of salt not
specifically designed for use
in
a dishwasher,
especially table salt,
will
damage the
water
softener. Only fill
with
salt just before starting
one of the complete
washing
programmes.
This
will
prevent any grains of salt or salty
water, which
may have been spilt
,
remaining
on the bottom of the machine for any period
of time,
which
may cause corrosion
.
level 1
yes
no
light
A goes on flashing and
simultaneously the End
indicator
light
starts flashing. Wait until programme
light
B
goes off. the programme
light
A
goes
on flashing and simultaneously the End
indicator
light starts flashing. This indi-
cates that
you
have activated the
electronic setting function of the
water
softener.
The current
level is indicated
by
the number of flashes of the
End
indica-
tor light and a pause of a few seconds
.
Examples:
5 flashes, pause, 5 flashes
, pause,
etc.
=
level 5
6 flashes, pause, 6 flashes, pause, etc.
=
level
6
3.
To change the level, press the pro-
gramme selection/cancel button
.
Each
time the button is pressed the
level
changes. (For the selection of the new
level
see the chart).
Examples
:
if
the current level is 5, by pressing pro-
gramme
selection/
cancel button once,
level
6 is selected,
if
the current
level
is 10, by pressing
pro-
gramme selection/cancel button once,
level 1 is selected
.
4. To memorize the operation, switch off the
dishwasher by pressing the
On/
Off but-
ton
.
To
fill
:
1.
Open the door, remove the lower basket
and unscrew the cap of the salt container
by turning
it
anticlockwise.
2.
Pour
1 litre of water into the container
(this is
necessary on ly before fi lling
with salt for the first
time)
.
3. Using the funnel provided, pour
in
the salt
until the container is full.
Advertisement
