Advertisement
I:;::.
The drain hose can face either to the right or
left of the dishwasher
Ensure the drain hose is not bent or
squashed as this could prevent or slow down
the discharge of water.
The sink plug must not be in place when the
machine is draining as this could cause the
water
to syphon back
into
the
machine.
If
you use a drain hose extension
it
must be
no longer than 2 metres and its internal
diameter must be no
smaller
than the
diame-
ter of the hose provided.
Likewise the
intern
al
diameter
of the cou-
plings used for connections to the
waste
outlet
must be no smaller than the diameter
of the hose provided
.
19
When connecting the drain hose to an
under
sink trap spigot.
the
entire
plastic mem-
brane (A) must be removed.
Failure to
re-
move all the membrane will result
in
food
particles building up over time eventually
blocking the dishwasher drain hose spigot
A
rn
Our
appliances
are supplied with a
security device to protect against the
re-
turn of dirty
water
back
into
the
machine.
If the spigot
of your
sink has a "no retum
valve"
incorporated this can prevent the
correct draining of
your
dishwasher. We
therefore advise
you
to remove
it.
rn
To avoid
water
leakage after installation
make sure that the
water
couplings are
tight.
Advertisement
