. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the PC Card Eject Levers
NOTE: The top and bottom eject levers are not interchangeable. Take special
precautions to note the proper position of each lever when installing the PC Card
eject levers.
1. Use a narrow flat tool, such as a small flat-blade screwdriver or a "spoojer," to hold
back the PC Card eject buttons
2. Align the PC Card eject levers with the flush edges of each lever located on the
inside
2
.
3. Place the PC Card eject levers on the mounting post
Figure 5-57. Installing the PC Card Eject Levers
5-62
Removal and Replacement Procedures
(Figure 5-57).
1
3
.