. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Tilt the computer at an angle
(Figure 5-23).
4. If the drive has been secured in the MultiBay with a single- or dual-bay security
screw
2
, remove the screw with the security wrench included with the computer.
5. Slide the MultiBay release latch
6. Grasp the drive using the recess
Figure 5-23. Releasing a Drive from the MultiBay
1
so the bottom of the computer is accessible
3
toward the back of the computer.
4
beneath the MultiBay.
Removal and Replacement Procedures
5-25