Cbx Electrical Connections - Datalogic DS6300 Reference Manual

3

3 CBX ELECTRICAL CONNECTIONS

Each scanner model has the following connectors:
Scanner Model
Master/Slave
Ethernet
DeviceNet
Profibus
* older models have RJ45 modular connector for Ethernet
Do not connect an RS232 port to the 9-pin Lonworks Connector. This may
damage your Laptop PC.
CAUTION
DS6300 Master/Slave models can connect their 25-pin male D-sub connector for connection
to the power supply, serial interface and input/output signals to a CBX connection box by
using the dedicated cables (CAB-Sxx).
DS6300 Fieldbus models can connect their 26-pin male D-sub connector for connection to
the power supply, serial interface and input/output signals to a CBX connection box by using
the dedicated cables (CAB-F0x).
We recommend making system connections through one of the CBX connection boxes since
they offer the advantages of easy connection, easy device replacement, filtered reference
signals and Backup and Restore features with the accessory BM100 module.
If you require direct wiring to the scanner the details of the connector pins
and relative connections are indicated in Chaper 4.
NOTE
For Lonworks network connections see chapters 5 and 7.
For Fieldbus connections see chapters 6 and 7.
For ID-NET™ Fixed Baudrate connections see the Application Note on the CD-ROM.
20
Connectors
25-pin male serial interface and I/O connector
9-pin male Lonworks connector (see caution below)
9-pin female Lonworks connector
26-pin male serial interface and I/O connector
9-pin female Lonworks connector
M12 4-pin D-coded connector for Ethernet *
26-pin male serial interface and I/O connector
9-pin female Lonworks connector
5-pin male connector
26-pin male serial interface and I/O connector
9-pin female Lonworks connector
9-pin female Profibus connector
DS6300 REFERENCE MANUAL