Cbx Electrical Connections - Datalogic DS8100A Reference Manual

CBX ELECTRICAL CONNECTIONS

3 CBX ELECTRICAL CONNECTIONS
Each scanner model has the following connectors:
Scanner Model
Standard
Ethernet
All DS8100A models can connect their 26-pin male D-sub connector for connection to the
power supply, serial interface and input/output signals to a CBX connection box by using the
dedicated cables (CAB-F0x).
We recommend making system connections through one of the CBX connection boxes since
they offer the advantages of easy connection, easy device replacement and filtered
reference signals.
If you require direct wiring to the scanner the details of the connector pins
and relative connections are indicated in Chaper 4 .
NOTE
For Lonworks network connections see chapters 5 and 7.
For Fieldbus connections see chapters 6 and 7.
Connectors
26-pin male serial interface and I/O connector
17-pin male Lonworks connector
17-pin female Lonworks connector
26-pin male serial interface and I/O connector
17-pin male Lonworks connector
17-pin female Lonworks connector
RJ45 Industrial modular connector
3
13