Multiplexer - Datalogic DS6300 Reference Manual

ALTERNATIVE LAYOUTS

MULTIPLEXER

The Multiplexer connection is used to integrate a DS6300 slave reader in a Multidrop
network consisting of different scanners not provided with a Lonworks interface.
Each scanner is
half-duplex main interface.
#0
DS6300
CAB-Sxx
1
MX4000
The auxiliary serial interface of the slave scanners can be used to visualize collected data or
to configure it using the Genius™ utility.
When On-Line operating mode is used, the scanner is activated by an External Trigger/PS
when the object enters its reading zone.
connected to
2
3
Power
Local Host
Figure 122 – Multiplexer for DS6300 Master/Slave Models
a Multiplexer (MX4000)
#1
CBX100

Main Serial Interface (RS485 Half-Duplex)

Auxiliary Serial Interface (Local Echo) (RS232)

Input 1 (External Trigger/PS for On-Line Mode)
with the RS485
#31
DS4800
A
107