Enerzone Solution 1.6 AGENCY PHASE II CERTIFIED WOOD Installation And Operation Manual page 44
Certified wood stove
Hide thumbs
Also See for Solution 1.6 AGENCY PHASE II CERTIFIED WOOD:
- Manual (44 pages) ,
- User manual (45 pages)
Table of Contents
Advertisement
Leg kit installation:
44
4- Secure
both
assembly (I) (to the underside
of the firebox using the bolts,
washers and nuts removed in
step
3.
installed on either side.
Note: Insert each bolt from the
inside of the firebox, this will allow
the bricks to sit more evenly on the
floor of the firebox.
5- Gently flip the stove back on its
legs making sure not to put too
much weight on the rear legs.
6- Open the ash drawer (J) lid
then slide it on the left and right
bend
of
brackets.
9- Position
the
installation and reinstall the
bricks, ash plug and loading
door
(see
Exploded Diagram and Parts
List for bricks layout).
Note:
Make
components
during the leg installation process
since a flue blockage may occur.
Solution 1.6 Installation and Operation Manual
leg
support
Supports
can
be
the
legs
support
stove
for
its
Appendix
9:
sure
that
baffle
have
not
moved
Advertisement
Table of Contents
