Table of Contents
Advertisement
KTD-00629-K
8.3.8
Advanced settings – Hardware Health Configuration
Advanced
Hardware Health Event Monitoring
System Temperature
CPU Temperature
THRM throttle limit
External Temperature Sensor
THRM throttle limit
Fan1 Speed
Fan Cruise Control
Fan2 Speed
Fan Cruise Control
Fan Setting
Fan3 Speed
Fan Cruise Control
Watchdog Function
V02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Feature
THRM throttle limit
Fan Cruise Control
Fan Settings
Watchdog Function
786LCD/mITX Family
Public
User Manual
BIOS SETUP UTILITY
:47ºC/116ºF
:48ºC/118ºF
[Disabled]
:N/A
[Disabled]
:Fail
[Disabled]
:2678 RPM
[Thermal]
[48°C/118°F]
:Fail
[Disabled]
[Disabled]
Options
Disabled
38°-80°C (100°-176°F)
Disabled
Thermal
Speed
1406-5625 RPM
30°-75°C (86°-167°F)
Disabled
32 seconds
76 seconds
Date: 2009-10-13
IF exceeded, throttle
event will be engaged
Choose impact via
"THRM Throttle Ratio"
in Power->APM menu.
<-
||
+-
F1
F10
ESC
Description
IF exceeded, throttle event will be engaged.
Choose impact via "THRM Throttle Ratio" in Power-
>APM menu.
Fan1 is System Fan.
Fan2 is CPU Fan.
Fan3 is Auxilary Fan (via Feature Connector).
When set to Thermal, the Fan will be controlled by
the corresponding temperature sensor (See Fan
Settings below)
When set to Speed, the Fan will be running at the
Fixed speed set by Fan Settings below.
The fan can operate in Thermal mode or in a fixed
fan speed mode
Select either 32 or 76 seconds for the boot process
until the Watch Dog service reloads the counter on
address IO460h.
The value for the counter shall be in the range 04h –
3Fh corresponding to 2.4 - 38 sec. in steps of 0.6
sec.
The Watchdog can be disabled/enabled by writing to
the address IO 469h Bit 3.
Page
60 of 77
Select Screen
Select Item
change option
General Help
Save and Exit
Exit
Advertisement
Table of Contents
