Fit the outlet and flexible exhaust pipe on top of range hood body.
4. Hang on the range hood, fasten 2pcs Screw(ST4x30mm) and L bracket onto two higher holes(with distance
to horizontal line 516mm), and then fasten 2pcs Screw (M4x10mm) and L bracket onto body.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result in
electrical hazards
B: Install into cabinet
1. According to below drawing to determine where want to place the range hood, and drill 6 holes with 4mm
diameter at the hanging board of your cabinet.
77mm
516mm
13mm
60mm
194mm
8