Advertisement
File No.
960-010
4. Bad track CHECK Selection
(1)
When Bad track CHECK is selected, the following message
will appear.
Drive number select (1:#1, 2:#2)
?
(2)
Select a drive number. Type the drive number and press
Enter.
The following message will appear.
Interleave number (3/1-3) ?
(3)
Select an interleave number.
(Usually select 3.)
Type
the number and press Enter.
When the following message appears, and bad tracks of
the hard disk are checked.
[HOD TYPE]
[HOD TYPE]
[HOD TYPE]
CYLINDER
HEAD
SECTOR
=
XXX
=
X
=
XX
[[cylinder,head
=
XXX XX]]
(4)
After checking the bad tracks of the hard disk, the
Format complete message will appear.
(5)
Press the Enter to return to the HARD DISK FORMAT menu.
3-34
Advertisement
