Advertisement
File No.
960-010
4.4
REMOVING/REPLACING THE PDP MASK
1.
Unplug the AC power cord from the system unit.
2.
Open the plasma display.
3.
Using tweezers, peel off the label (A) and keep it in a
clean place.
4.
Remove 2 screws (B) fixing the PDP mask (C) by holding
bottom (D) and lifting up.
Figure 4-6
PDP mask
5.
Reverse procedure to install.
NOTE:
Confirm that the PDP mask is locked into the PDP
cover with the six latches (E).
4-7
Advertisement
