File No.
960-010
4.
Remove the keyboard, the PDP unit and the LED board
according to sections 4.2 and 4.4 through 4.6.
5.
Remove 3 screws (B) in the figure 4-13 according to
section 4.8.
Lift up PDP cover and top cover together
and press the cable guide (B) nail out from the other
side.
6.
Remove the stopper plate (C) by removing 2 screws (D)
and flat head screw (E).
(C)
Figure 4-10
Stopper plate and cable guide
4-11