Table 5-2: Embedder 1 Enable Switch Settings; Table 5-3: Embedder 1 Group Switch Settings; Table 5-4: Embedder 2 Enable Switch Settings - evertz 7721AE4-B-HD Manual

Table of Contents

Advertisement

7700 MultiFrame Manual
7721AE4-(B)-HD HDTV 4 Channel AES Audio Embedder
The source for Embedder A is the audio coming in on the AES IN 1 and 2 connectors. The source for
Embedder B is the audio coming in on the AES IN 3 and 4 connectors. There are separate DIP switch
settings that are used to enable or disable each embedder as well as to set the audio groups where the
embedders will place the audio on the SDI output.
When the DIP switches are set as shown in Table 5-2, the toggle switch is used to enable or disable
Embedder 1. Each time the toggle switch is pressed up or down the Embedder 1 Enable mode will
change as indicated by the LEDs in Table 5-2.
When set to Disable, embedder 1 will be disabled. When set to Enable, the embedder destination can be
set when the DIP switches are set as shown in Table 5-3. Channels 1 and 2 from AES input 1 will be
embedded into channels 1 and 2 of the selected group. Channels 1 and 2 from AES input 2 will be
embedded into channels 3 and 4 of the selected group. If audio is not present on one or both of the AES
inputs, the respective channels of the selected audio group will be mute.
DIP Switch
1
2
3
4
Off
On
Off
Off
DIP Switch
1
2
3
4
On
On
Off
Off
When the DIP switches are set as shown in Table 5-4, the toggle switch is used to enable or disable
Embedder 2. Each time the toggle switch is pressed up or down the Embedder 2 Enable mode will
change as indicated by the LEDs in Table 5-4.
When set to Disable, embedder 2 will be disabled. When set to Enable, the embedder destination can be
set when the DIP switches are set as shown in Table 5-5. Channels 1 and 2 from AES input 3 will be
embedded into channels 1 and 2 of the selected group. Channels 1 and 2 from AES input 4 will be
embedded into channels 3 and 4 of the selected group. If audio is not present on one or both of the AES
inputs, the respective channels of the selected audio group will be mute.
DIP Switch
1
2
3
4
Off
Off
On
Off
Page-10
5
6
7
8
Off
Off
Off
Off

Table 5-2: Embedder 1 Enable Switch Settings

5
6
7
8
Off
Off
Off
Off

Table 5-3: Embedder 1 Group Switch Settings

5
6
7
8
Off
Off
Off
Off

Table 5-4: Embedder 2 Enable Switch Settings

Revision 1.5
Control
Value
Description
Description
Disable
Embedder 1
Enable
Control
Value
Description
Description
Group 1
Embedder 1
Group 2
Group
Group 3
Group 4
Control
Value
Description
Description
Disable
Embedder 2
Enable
LED
1
2
3
4
Off
Off
Off
Off
On
On
On
On
LED
1
2
3
4
On
Off
Off
Off
Off
On
Off
Off
Off
Off
On
Off
Off
Off
Off
On
LED
1
2
3
4
Off
Off
Off
Off
On
On
On
On

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7721ad4-b-hd

Table of Contents