GRASS VALLEY OCP 400 User Manual page 48

– The optical filter wheels are controlled with the ND and FX UP and DOWN selection
Menu
Filters
page 1
Filters
page 2
[LDK 500
only]
Filters
page 3
[LDK 500
only]
*) Not available on LDX Flex version.
Gradient Filter menu (LDK 500 only)
Menu
Gradient
filter page 1
[LDK 500
only]
Gradient
filter page 2
[LDK 500
only]
Gradient
filter page3
[LDK 500
only]
Soft Focus Filter menu (LDK 500 only)
48
buttons.
Selections Function
ND Up Increase ND Filter position
FX Up *) Increase FX Filter position
ND Down Decrease ND Filter position
FX Down *) Decrease FX Filter position
Gradient Select electronic gradient filter
SET Go to Set Gradient page
Soft Fcs Select electronic soft focus filter B
SET Go to Set Soft Focus page
Monotone Select electronic monotone
filter
SET Go to set monotone filter page
-
-
Selections Function
Gradient Turns gradient filter on or off
Preset Selects gradient filter presets
Zone Selects area of gradient filter
View Selects view mode
Gradient Turns gradient filter on or off
-
Centre Sets center position
Width Selects transition width
Gradient Turns gradient filter on or off
Depth R Set red color depth
Depth G Set green color depth
Depth B Set blue color depth
Chapter 4 - Operation
Level Possible values
S CLR, ND 1/4, ND 1/16, ND 1/64
S CLEAR, 4 Star, 6 Star,Soft Focus
S
S
B On, Off
B
On, Off
B
B On, Off
B
Level Possible values
B On, Off
B ND0.3/0.6/0.9, Sunset, BlueSky,
Var
B Top, Left, Bottom, Right
B On, Off
B On, Off
B
B 0..99
B 1,2,3,4,5,6,7
B On, Off
B 0..99
B 0..99
B 0..99
OCP 400 Operational Control Panel User's Guide (v12.0)