4.1.3 Changing camera video parameters
There are several ways of changing the video parameters of the camera from the OCP:
•
scene files
•
standard values
•
the direct video parameter buttons
•
programmable functions
Scene files
Scene files can be stored and recalled to immediately change a complete set of parameters.
Standard values
Different set of standard values can be recalled to immediately reset the video parameters.
Direct video parameter buttons
A direct video parameter button when selected brings its associated menu to the display
where you can navigate, select and vary the applicable values.
Programmable functions
Up to 6 functions can be assigned in the OCP setup menu (refer to
page
20). These functions are accessed from the monitoring pages.
30
Chapter 4 - Operation
"Setting up the OCP" on
OCP 400 Operational Control Panel User's Guide (v12.0)