GRASS VALLEY OCP 400 User Manual page 37

The last item in the scene file list is <New File>. Select this item to create a new file on your
card and store the current camera settings to the new file.
file name
The default name appears for your new file. You can change it by using the Rotary Control to
select a character and the PREV and NEXT buttons to move the cursor back and forward.
• Use the TOGGLE button to select a different character set (abc - 123 - #!@ - ABC).
• Select CLEAR to clear the file name.
• Select OK to use the new filename. The file will be added to the card and the current
settings are stored in this file.
• Select CANCEL to cancel the operation and return to the Recall/Store menu.
☞ ☞
Note Note
File names can have up to ten characters.
OCP 400 Operational Control Panel User's Guide (v12.0)
Clear
file
name
EXIT
CLEAR
Filename: OCPFile01
[OCPfile_
New
<= OK Cancel
PREV
Move Confirm Cancel
cursor file
back name
Select
character
set
TOGGLE
abc
]
=>
NEXT
Move
file cursor
name forward
Chapter 4 - Operation
37