4.4 OCP File Management
4.4.1 Introduction
Use OCP File Management to manage settings and scene files for your camera. Up to four
scene files can be stored in the camera while more Card scene files can be stored on an OCP
storage card.
– To access OCP File Management functions, push the FILES button to open the menu.
4.4.2 Formatting OCP storage cards
CAMERA CARD
Before OCP File Management can be used you need to format an OCP storage card. Empty
cards can be obtained from Grass Valley in a set of 10 cards (LDK 5210). Follow these steps for
to format a card:
1.
Insert the card into the slot at the top of the OCP and push the FILES button.
2.
Push the NEXT button until the OCP 400 Card item appears.
3.
Select the Format option and wait a few seconds.
4.
Your OCP storage card is now ready for use.
☞
☞
Note
Note
Make sure not to format your camera owner's card: this will make the owner's card unusable.
☞
☞
Note
Note
Camera user's cards and OCP storage cards look identical, but they are not interchangeable.
OCP 400 Operational Control Panel User's Guide (v12.0)
Chapter 4 - Operation
35