4.3 Using files
4.3.1 Storing and recalling scene files
The scene file function is used for storing and recalling scene settings for the camera. Four
scene files can be stored in memory positions 1 to 4 of the camera.
•
To recall a scene file, push the FILES button to open the menu.
•
Select a memory position 1 to 4. The values stored in this file are then recalled.
To create a scene file, set up the values for all the functions on the OCP , push the FILES button
to open the menu. Push the NEXT button to open the store page and then select a memory
position. The values are stored in this position.
☞
☞
Note
Note
When a scene file is recalled, the values only take effect if the camera is not On Air.
Menu
Scene
files
page 1
Scene
files
page 2
34
Selections
Function
RECALL 1
Recall Scene File 1
RECALL 2
Recall Scene File 2
RECALL 3
Recall Scene File 3
RECALL 4
Recall Scene File 4
STORE 1
Store Scene File 1
STORE 2
Store Scene File 2
STORE 3
Store Scene File 3
STORE 4
Store Scene File 4
Chapter 4 - Operation
Level
Possible values
S
Ready, Failed
S
Ready, Failed
S
Ready, Failed
S
Ready, Failed
S
Ready, Failed
S
Ready, Failed
S
Ready, Failed
S
Ready, Failed
OCP 400 Operational Control Panel User's Guide (v12.0)