Programmable Function - GRASS VALLEY OCP 400 User Manual

Status page 3
Displays information about gain and black levels, detail, master black, iris and variable gain.
Black R,G and B
4.2.2 Programmable function pages
This page gives direct access (by pressing the corresponding SELECTION button) to up to 6
programmable functions.
Function page 1
This page gives access to programmable functions 1 and 2.
function 1 up control
function 1 down control
Function page 2
This page gives access to programmable functions 3 to 6.
☞ ☞
Note Note
Programmable functions that are disabled in the OCP setup menu are not shown. When all
functions on a page are disabled, the entire page is not shown.
32
Gain R,G and B
values
values
Detail function
and value
Programmable
Function
value
Programmable
Programmable
function 3
Function
value
Function
value
Programmable
function 5
EXIT TOGGLE
GAIN R50 G50 B50
BLACK R50 G50 B50
50 50 F8.0 14.1dB
DTL MBL IRIS GAIN
PREV NEXT
Iris function 
Master black
and value and value
EXIT TOGGLE
Gain + ND Up
0 Clear
Gain - ND Down
PREV NEXT
EXIT TOGGLE
Var CTemp Var Gain
3200K 0.0 dB
30 Off
Dtl Lvl Knee
PREV NEXT
OCP 400 Operational Control Panel User's Guide (v12.0)
Chapter 4 - Operation
Variable gain
function and value
Programmable 
function 2 up control
Function
value
Programmable 
function 2 up control
Programmable
function 4
Function
value
Function
value
Programmable
function 6