Power Out Connector (J18) - Kontron KTA70M/mITX User Manual

KTD-N0861-B
7.3

Power Out Connector (J18)

The Power Out connector can be used to power source external devices like HDD. The connector is type
Molex 22-23-2041 or similar.
Header
Warning: Hot Plugging power supply is not supported. Hot plugging might damage the board.
Notes: To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Available cable kit:
Page 26
Pin Signal
1 5V
2 GND
3 GND
4 12V
PN 1027-3669 Cable Power Out
KTA70M/mITX Users Guide
KTA70M/mITX Users Guide
Description Type
Power +5V PWR
Ground PWR
Ground PWR
Power +12V PWR
Pin Connectors