Tips - Mytee 8070 Instruction Manual & Safety Manual

TIPS

WARNING: Flammable materials or reactive metals can cause an explosion or fire.
Do not pick up.
1. Work away from outlet and power cord to prevent cord damage.
2. Use a recommended foam control solution in the recovery tank to prevent vacuum motor
damage. Periodically check for excessive foam buildup in solution tank.
3. To clean heavily soiled areas, repeat cleaning path from different direction.
4. After cleaning, relieve water pressure from tool before disconnecting hose. Squeeze trigger
for five seconds after turning main power switch off.
5. Always hook up solution and vacuum hoses to the machine BEFORE turning on pumps or
motors. Solution lines will be difficult, if not impossible to plug in while pump is pressurized.
6. If the vacuum lid is left open, machine will experience a great loss in vacuum power.
7. For upholstery cleaning, use very low pressure and heat. NOTE: When cleaning upholstery,
always check cleaning instructions sewn in furniture by manufacturer.
8. If using a powdered soap, pre-mix it in a bucket until completely dissolved, before placing it
in solution tank. Putting solids in solution tank can lead to clogs and pump failure.