Safety Precautions - Mytee 8070 Instruction Manual & Safety Manual

This machine is intended for commercial use. It is designed to clean carpet and upholstery in an indoor environment
and is not constructed for any other use. Use only recommended cleaning solutions and accessory tools. All
operators must read, understand and practice the following safety precautions:
WARNING: Flammable materials can cause an explosion or fire. Do not use flammable
materials in tank(s).
FOR SAFETY:
1. Do not operate machine:
♦ ♦ ♦ ♦ Unless trained and authorized.
♦ ♦ ♦ ♦ Unless operator manual has been read and understood.
♦ ♦ ♦ ♦ In flammable or explosive areas.
♦ ♦ ♦ ♦ Unless cord is properly grounded.
♦ ♦ ♦ ♦ With damaged cord or plug.
♦ ♦ ♦ ♦ If not in proper operating condition.
♦ ♦ ♦ ♦ In outdoor areas.
♦ ♦ ♦ ♦ In standing water.
2. Before operating machine:
♦ ♦ ♦ ♦ Make sure all safety devices are in place and operate properly.
3. When using machine:
♦ ♦ ♦ ♦ Do not run machine over cord.
♦ ♦ ♦ ♦ Do not pull machine by plug or cord.
♦ ♦ ♦ ♦ Do not pull cord around sharp edges or corners
♦ ♦ ♦ ♦ Do not unplug by pulling on cord.
♦ ♦ ♦ ♦ Do not stretch cord.
♦ ♦ ♦ ♦ Do not handle plug with wet hands.
♦ ♦ ♦ ♦ Keep cord away from heated surfaces.
♦ ♦ ♦ ♦ Report machine damage or faulty operation immediately to your distributor.
♦ ♦ ♦ ♦ Follow mixing and handling instructions on chemical containers.
4. Before leaving or servicing machine:
♦ ♦ ♦ ♦ Turn off machine.
♦ ♦ ♦ ♦ Unplug cord from wall outlet.
5. When servicing machine:
♦ ♦ ♦ ♦ Unplug cord from wall outlet.
♦ Avoid moving parts.
♦ ♦ ♦ ♦ Do not wear loose jackets, shirts, or sleeves.
♦ ♦ ♦ ♦ Use manufacturer supplied or approved replacement parts.
WARNING: Hazardous Voltage. Shock or electrocution can result. Always unplug
machine before servicing.
Machine must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electrical shock. This machine is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed in accordance with all local code and ordinances. Do not remove ground pin; if missing, replace
plug before use.
WARNING: Flammable materials or reactive metals can cause an explosion or fire.

SAFETY PRECAUTIONS