Table of Contents
Advertisement
Nautique Sport Sec 8.qxd
7/8/05
4:11 PM
Page 8-12
Section 8
If your boat's gelcoat develops a chalky look over a period of time
due to exposure to sun, there are gelcoat buffing and polishing
compounds available at your Correct Craft dealer and marine
supply stores. DO NOT use common household scouring pads or
powders.
If you will be keeping your boat in the water for ANY period of time,
we suggest that the wetted surface of the hull be painted with an
epoxy paint formulated for blister protection.
Care of Metal
Keep all metal work rinsed and wiped dry. Periodically polish it with
a quality commercially available metal polish to remove substances
such as air-borne pollution and natural body oils from your hands.
Care of Glass
Your windshield, mirrors and gauge faces all deserve the same
attention as the other parts of your boat. Clean them often with
quality commercially available glass cleaners.
Vinyl Maintenance and
Cleaning
Correct Craft has selected the finest marine grade vinyl for your
Nautique. It is important to keep it clean at all times. There are
some substances that will stain the vinyl if you leave them on for
even a short period of time. Remove any contaminant and clean
the area immediately. DO NOT use Formula 409® Cleaner or any
silicone based products. Certain household cleaners, powdered
abrasives, steel wool, industrial cleaners, dry cleaning fluids and
lacquer solvents can cause damage and discoloration. DO NOT use
these cleaners.
8-12
Correct Craft, Inc.
Advertisement
Table of Contents
