Fixing The Print Paper Tray ([Tray Selection For Rx Print]); Splitting A Custom Size (Portrait) Fax For Printing ([Print Separate Fax - Olivetti d-Color MF552 Fax Manual

6.14 Configuring the fax print settings (for the administrator)

Fixing the print paper tray ([Tray Selection for RX Print])

You can always print on the paper loaded into the specified tray irrespective of the paper size of the received
fax.
If the size of the received fax is different from the size of the paper in the specified tray, the fax is printed while
increasing or reducing according to the paper size of the tray.
For details on how to configure the settings, refer to page 11-23.
Tips
- If the tray is specified in [Tray Selection for RX Print], the setting for [Print Paper Size] is ignored ([Print
Paper Selection] is automatically switched to [Auto Select]).
- If [Min. Reduction for RX Print] is set to [Full Size], [Tray Selection for RX Print] is compulsory switched
to [Auto].
Splitting a custom size (portrait) fax for printing ([Print Separate Fax Pages])
For faxes that are longer in the longitudinal direction than the standard size, the print size is not reduced, how-
ever any area that cannot be fitted to a standard size is printed on the subsequent page.
For details on how to configure the settings, refer to page 11-23.
Tips
- If [Min. Reduction for RX Print] is set to [Full Size], [Print Separate Fax Pages] is compulsory switched
to [OFF], and the area that cannot be fitted on a standard size sheet is not printed at all.
- If [Duplex Print (RX)] is [ON], you cannot use [Print Separate Fax Pages].
d-Color MF552/452/362/282/222
6
6-19