Operation Flow - Olivetti d-Color MF552 Fax Manual

4

Operation flow

1
Load the original.
2
Tap [Scan/Fax].
3
Specify the fax number of the relay station.
4
Tap [Application] - [Fax Setting] - [F-Code TX], then tap [ON].
5
Enter the [SUB Address] and [Sender ID], then tap [OK].
% [SUB Address]: Enter the relay user box number.
% [Sender ID]: Enter the relay TX password for the relay distribution.
6
Press the Start key.
Fax transmission to the relay station begins. Faxes received by a relay station are delivered to destina-
tions registered with the relay station.
4-12
Sending a fax after specifying a relay station ([F-Code TX])
d-Color MF552/452/362/282/222
4.6