4.13
Sending a fax with a password ([Password TX])
4.13
Sending a fax with a password ([Password TX])
Password TX
The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which
fax peers are restricted by passwords (a device with Closed Network RX enabled).
Tips
-
You can only use this function to communicate with Olivetti models supporting the closed network re-
ception (password) function.
-
You need to check the recipient's closed network reception password beforehand.
-
This function cannot be used together with the following functions:
–
Relay Distribution, Confidential Communication, Polling TX, Polling TX (Bulletin Board), Polling RX, Poll-
ing RX (Bulletin Board).
d
Reference
This machine can restrict fax destinations using the Closed Network RX function. For details on the Closed
Network RX function, refer to page 6-12.
Operation flow
1
Load the original.
2
Tap [Scan/Fax].
3
Specify the destination.
4
Tap [Application] - [Fax Setting] - [Password TX], then tap [ON].
5
Using the Keypad, enter the Closed Network RX password of the destination, then tap [OK].
6
Press the Start key.
Transmission begins.
d-Color MF552/452/362/282/222
4
4-21