Using Studiolive Remote For Ipad; Networking Your Ipad And Computer - PRESONUS StudioLive 24.4.2 Owner's Manual

Owner's Manual
7.3

Using StudioLive Remote for iPad

7.3.1

Networking your iPad and Computer

STEP 1: Creating an Ad Hoc Network on your Computer
Software: Universal Control, SL Remote, Capture, and Studio One Artist 7
StudioLive Remote for iPad provides an unprecedented level of remote
control over your StudioLive. With SL Remote, you can adjust level,
pan, dynamics, bus routing, FX mixes, Aux mixes, and GEQ setting from
an Apple iPad via a wireless network. All you need is a computer with
Wi-Fi capabilities and an Apple iPad, and you're ready to get started.
Please Note: This section describes the functionality of
SL Remote with all three StudioLive series mixers. All
Screen Shots are from the StudioLive 24.4.2.
To use StudioLive Remote, you must first install Universal Control on, and
sync your StudioLive to, a Windows or Apple computer that has both
a FireWire connection and a wireless card. Once you have connected
and synced your StudioLive to VSL on your computer, the next step is to
create an ad hoc wireless network between your iPad and your computer.
An ad hoc, or "peer-to-peer, " network is a very simple network
involving at least two systems—in this case, the computer to which
your StudioLive is connected and an Apple iPad. Unlike the usual local
area network (LAN) that you use to connect multiple computers to
the Internet or to a shared file server, no server or router is needed.
Creating an ad hoc wireless network between your computer and your
iPad is quick and easy. The network will allow you to remote-control VSL,
and hence your StudioLive, from an iPad, using StudioLive Remote.
Windows Vista
1. Open Start>Connect to.
2. Click "Set up a connection or network. "
3. Select "Set up a wireless ad hoc network" and click Next.
4. Enter the new network name such as "StudioLive. "
5. Enter a Security key or password. For the best security,
include letters, numbers, and punctuation.
6. Check "Save this Network. "
Using StudioLive Remote for iPad 7.3
87 87