Internal Aux Send Controls - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

4 Controls
4.4 Aux Sends

4.4.2 Internal Aux Send Controls

Mute Button
Post Fader Send Button
Output Level Control
Internal Effects Send
Select Button
Mix Button
42 42
Mutes and Un-mutes the Internal Effects Bus.
This button will mute or un-mute its internal effects (EFX)
bus. It will illuminate red when the bus is muted.
Enables and Disables Post Fader Send.
By default, this button is enabled, and the send levels to the effects buses
are post-EQ, post-dynamics processing, and post-fader, and therefore are
affected by fader settings. If the button is disabled, by default, the EFX sends
use the Pre 2 setting, in which the sends are post-EQ and post-dynamics
but pre-fader. However, in the System Menu, you can switch the EFX sends
to the Pre 1 setting, in which the sends are pre-fader and pre-Fat Channel
dynamics processing and EQ. Please review Section 5.4 for details.
Adjusts the Master Level of the Effects Send.
This knob adjusts the master level of the internal effects send
.
Enables Fat Channel Viewing.
As described in section 4.1.1, the Select button routes its aux
send through the Fat Channel, allowing you to add dynamics
processing and EQ and routing the aux send to outputs.
Enables Aux Bus Mixing and Metering in the Fat Channel.
When this button is enabled, the 24 encoders in the Fat Channel become
the aux-send level controls for each of their respective input channels.
The meters will display the send level of each of the input channels.
PreSonus StudioLive 24.4.2
™