Advertisement
Vonage V-Portal User Guide
to the V-Portal. You'll also see this icon displayed on the status bar of the LCD and Web UI when you can
place and receive phone calls using Phone Line 1.
represents Phone Port 2 or Phone Line 2. When you sign up for two lines of Vonage service, you'll
typically plug the phone for your secondary line into Phone Port 2 on the V-Portal after you peel off the clear
label from the port. The Phone Port 2 icon on the green label surrounding a port on the rear panel of the V-
Portal identifies it as the port you'll use to connect the phones for your secondary line to the V-Portal. You'll
also see this icon displayed on the status bar of the LCD and Web UI when you can place and receive
phone calls using Phone Line 2.
Informational LEDs
Two light-emitting diodes (LED) are located on the sides of both the blue Internet port and the yellow
Ethernet (LAN) port. A yellow LED is located on the left of the port and a green LED is on the right.
The yellow LED is lit solid when the port is connected. For example, if the yellow LED on the left of the
Internet port is lit solid yellow, the V-Portal is connected to your cable or DSL modem.
The green LED blinks when there is activity on the port. For example, if the green LED on the right of the
Ethernet (LAN) port is blinking green, data is being sent either to or from your equipment (such as a
computer or router) connected to the V-Portal's Ethernet (LAN) port.
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to
3
Section 11 which explains limitations on Warranty, Remedy and Liability.
Advertisement
