3. Installation; Commissioning; 5. Power Supply Connections - Eneo VKC-1357 Installation And Operating Instructions Manual

4.1.3. Installation

The camera has a /4" thread insert on its top and bottom side for mounting the camera to a tripod or the wall or
ceiling with a corresponding mount.

4.1.4 Commissioning

• Connect the power to the camera firstly
• Plug the power adaptor to the mains supply secondly
• Power indicator LED (c, s. 3..) will be lit
• The camera is ready for operation

4.1.5. Power Supply Connections

Camera can work with either VDC or 4VAC, dual voltage power. It does NOT require the polarity-matched con-
nection for VDC supply. Primary and secondary grounds are completely isolated to avoid the possible ground-loop
problems. Its excellently wide operating voltage range of 0.5V-30V for DC and -9V for AC gives an extra flexibility
at the installation.
53