Assembly On A Flush-Mounted Socket; Art. No. 8848) - Eneo VKC-1357 Installation And Operating Instructions Manual

4.2.5 Assembly on a flush-mounted socket (with the installation kit W3 INST-KIT1,
)
Art. No. 88148
With the aid of the W3 INST-KIT, the camera can be installed onto standard flush-mounted sockets.
13 14
Description of components
11
() Fixing screws for securing camera base to panel (3)
(3) Panel for attachment to the flush-mounted socket
(4) Panel for attachment of camera
NOTE: Screws for attachment to the flush-mounted socket
Easy-Installation cable
. Connect plug socket (camera side) and plug (cable side),
slightly loosen the 3 screws that hold the neck (0) (but do
not undo them completely!), so that the body of the camera
can move.
. Adjust the camera angle. The panel nut (3) must be
inserted in the hole in the camera assembly panel (9).
W3 INST-KIT1 assembly kit is installed with the camera on
the flush-mounted socket.
Wall
. Using the screws, secure the camera on the W3 INST-KIT
Flush-mounted
assembly kit.
socket
. Re-tighten the 3 screws that hold the neck.
NOTE: Flush-mounted socket, screws for the kit assembly
are not included.
panel and screws and rawl plugs for wall
attachment are not included.
56