TIPTEL 215 Plus Operating Instructions Manual page 110

LCD contrast .......................... You can set the display contrast in 10 steps.
Remote access code ............ A 3-digit code can be set for the remote access function. If the code "000" is selected (de-
Signal code............................. By entering a signal code those who have the code can produce an acoustic signal from
en
Operation
Message Detection to avoid unnecessary toll charges when calling long distance to check
your messages. To use this feature set the ringer select to toll saver. If there are new mes-
sages, the tiptel 215 Plus will answer after 2 rings, otherwise it will answer after 4 rings.
Thus, when checking messages you can hang up after 2 rings because the tiptel 215 Plus
has no new messages.
fault setting), the remote access function is deactivated.
your tiptel 215 Plus. You can enter a three digit code as a signal code.
16