Lenovo ThinkServer User Manual page 160

8. Remove the screw
remove the front panel board assembly from the chassis and pull the signal cables of the front panel
board assembly out of the chassis.
Figure 84. Removing the front panel board assembly
9. Touch the static-protective package that contains the new front panel board assembly to any unpainted
surface on the outside of the server. Then, take the new front panel board assembly out of the package.
10. Note the cable connection. Then, disconnect the signal cables from the rear of the old front panel board
assembly and connect them to the rear of the new one.
148
ThinkServer User Guide
1 on the chassis that secures the front panel board assembly. Then, carefully