Lenovo ThinkServer User Manual page 48
Machine types: 0387, 0388, 0389, 0390, 0391, 0392, 0393, and 0441
Hide thumbs
Also See for ThinkServer:
- User manual (210 pages) ,
- Specification (8 pages) ,
- Warranty and support information (42 pages)
Table of Contents
Advertisement
The following illustrations show the connectors on a 3.5-inch hot-swap hard disk drive backplane.
Figure 19. Front view of the 3.5-inch hot-swap hard disk drive backplane
1
Slot 0 for a 3.5-inch SATA or SAS hot-swap hard
disk drive
2
Slot 1 for a 3.5-inch SATA or SAS hot-swap hard
disk drive
Figure 20. Rear view of the 3.5-inch hot-swap hard disk drive backplane
1
8-pin power connector
• For 3.5-inch hot-swap hard disk drive backplane on the lower hard disk drive cage, connect the P5 power
connector of the power supply to the 8-pin power connector on the backplane.
• For 3.5-inch hot-swap hard disk drive backplane on the upper hard disk drive cage, connect the P4 power
connector of the power supply to the 8-pin power connector on the backplane.
2
Mini-SAS signal cable connector
Used to connect the mini-SAS connector on one end of the mini-SAS signal cable.
36
ThinkServer User Guide
3
Slot 2 for a 3.5-inch SATA or SAS hot-swap hard disk drive
4
Slot 3 for a 3.5-inch SATA or SAS hot-swap hard disk drive
Advertisement
Table of Contents
Troubleshooting
