Exporting & Importing Configuration - HIKVISION DS-7604NI-E1 User Manual

DS-7600 Series NVR User's Manual
Exporting & Importing Configuration
Configuration information from your NVR can be exported to a USB storage device and imported into
another NVR. This will allow you to efficiently setup the same configuration on numerous NVRs.
To export NVR configuration:
1. Enter the Import/Export menu, shown in Figure 105 by going to Menu > Maintenance >
Import/Export.
2. Connect the USB storage device to a USB port on the NVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. You can click the New Folder button to create a new folder.
5. Select the location where you would like the configuration to be stored on the USB storage
device.
6. Click Export to export a configuration file to USB storage device. The configuration file will be
named devCfg.bin.
7. Click to exit out of the Import/Export menu.
To import NVR configuration:
1. Enter the Import/Export menu, shown in Figure 105 by going to Menu > Maintenance >
Import/Export.
2. Connect the USB storage device to a USB port on the NVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Select the configuration file. The configuration file is named devCfg.bin.
5. Click the Import button.
6. In the pop-up window click Yes to confirm the import and the system will automatically reboot to
make it effective.
Figure 105 Import/Export Menu
108