HIKVISION DS-7604NI-E1 User Manual page 34

DS-7600 Series NVR User's Manual
Previous Screen/Next Screen: Click to view the previous/next set of display. In a 2x2 mode, this will
show the next four display. In a 3x3 mode, this will show the next nine display.
Start/Stop Auto-Switch: Click to start/ stop auto-switch. Auto-switch will cycle through selected
cameras. Switching of camera can be based on an individual or multiple cameras.
Start Recording: Click the Continues Record/Event Record item. This will bring up an attention box
shown below. If you click yes, it will start all-day continues/event recording of all channels.
Output Mode: Click the Output Mode item. This will bring up an Output Mode menu shown below.
Four modes are available: Standard, Bright, Gentle and Vivid. Select one and click the Apply button to
save the setting.
Note:
Before you start Auto-switch, you should set Dwell Time in Live View setting menu by going to Menu >
System Configuration > Live View > General.
Note:
34