Checking The Status Of Your Nvr - HIKVISION DS-7604NI-E1 User Manual

DS-7600 Series NVR User's Manual
5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the Enable
NTP checkbox. You can set the interval and enter your own NTP server.
6. Click the Apply button to save the settings and click
without clicking the Apply button will exit the menu without saving.

Checking the Status of Your NVR

The current status of your NVR can be checked at anytime by going to the System Information menu. The
System Information menu can be accessed by going to Menu > System Information.
1. Select the Device Info tab to enter the Device Information menu to view the device name, model,
serial No., firmware version, encode version and ezviz verification code, as shown in Figure 10.
2. Select the Camera tab to enter the Camera Information menu to view the status of each camera, as
shown in Figure 11.
Figure 9 System Information Menu
to exit out of the menu. Clicking
23