Managing User Accounts; Changing Password - HIKVISION DS-7604NI-E1 User Manual

DS-7600 Series NVR User's Manual
2. Port:

Server Port: Enter the Server Port which designates the port to be used with the client
software.

HTTP Port: Enter the HTTP Port which refers to the one to be used with the built-in Web
Server.

Multicast IP: Enter the Multicast IP to enable multicast.

RTSP Port: Enter the PTSP Port. PTSP is a network control protocol designed for use in
entertainment and communication systems to control streaming media servers.
3. Enable High-speed Download: You can enable the High-speed Download function to widen the
outgoing bandwidth of the device. In this way you can speed up the download of record files
through IE browser or CMS software.
4. Enable Telnet: You can enable the telnet function based on your need.
5. Click Apply to save the network settings and click
without clicking Apply will quit out of the menu without saving settings.
Note:
If you enable the high-speed download function, the local menu operation will be affected. It is
recommended to disable this function after finishing the remote downloading of record files.

Managing User Accounts

By default, your NVR comes with one user account, the Administrator account. The Administrator user
name is admin and the password is 12345. The default password for Administrator should be changed
right away for security reasons. The Administrator has the authority to add, delete or configure
parameters for many of the system functions.

Changing Password

You can change the default password by going to Menu > System Configuration > User, as shown in
Figure 52.
To change the password:
Figure 50 User Settings Menu
to return to the previous menu. Click
64