Managing Hdd Group - HIKVISION DS-7604NI-E1 User Manual

DS-7600 Series NVR User's Manual
3. Select the Mode to Quota.
4. Select a camera for which you want to configure quota.
5. Enter the storage capacity in the text fields of Max. Record Capacity (GB).
6. If the same settings can be applied in other channels, click Copy and select the corresponding
channels.
7. Click the Apply button to save the settings.
Note:
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record.

Managing HDD Group

Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings. To managing HDD Group:
1. Enter the HDD menu by going to Menu > System Configuration > HDD.
2. Select the Storage Mode tab, as shown in Figure 93.
3. Select the Mode to Group, as shown in Figure 94.
4. Click the Apply button to pop up an attention box as shown below:
5. Click Yes to reboot and make the settings effective. Click No to cancel the operation.
Figure 94 Group Mode Settings Menu
Figure 95 Attention for reboot
96