• In order to enjoy the surround sound after you change
the position of the speakers, it is recommended you
set [SPEAKER FORMATION], and then set [AUTO
• To set [AUTO CALIBRATION], you need to
connect the supplied calibration mic.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [SIZE] setting in [SPEAKER
SETUP], the [SPEAKER FORMATION] setting
returns to [STANDARD].
Downloaded From TheatreSystem-Manual.com Manuals
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the volume
down. Give consideration to children and neighbor.
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
DISPLAY when the system is
in stop mode.
The Control Menu appears.
Press X/x to select
FORMATION], then press
1 ( 4 4 )
3 ( 2 8 )
0 : 0 3 : 0 4
Press X/x to select [AUTO
CALIBRATION], then press
The options for [AUTO CALIBRATION]
Connect calibration mic. Start
Connect the calibration mic to the A.CAL
MIC jack on the front panel, and set it up at
the ear level using a tripod, etc. (not
supplied). The front of each speaker should