Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operation details supplied with your
Turn on your TV.
Switch the input selector on the TV to
The system turns on.
Unless the system is set to "DVD," press
FUNCTION +/– to select "DVD."
Downloaded From TheatreSystem-Manual.com Manuals
Load a disc.
Place one disc on the tray, and then press A.
When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc
is not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
The system starts playback (continuous
Adjust the volume on the system.
The volume level appears on the TV screen
and in the front panel display.
• Depending on the system status, the volume level
may not appear on the TV screen.
To save the power in standby
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
Resume play after pause
Go to the next chapter,
track, or scene
Go back to the preceding
chapter, track, or scene
Mute the sound
X or H
> (except for JPEG)
. (except for JPEG)
MUTING. To cancel
muting, press it again
or VOLUME + to
adjust the sound