Download  Print this page

Advertisement

[SUBWOOFER]
0.0 dB
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
0.0 dB
(appears when
you set
[SURROUND] to
[YES] in the
[SIZE] setting.)
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the system, or
press VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
1
Press
in stop mode.
The Control Menu appears.
2
Press X/x to select
then press
The options for [SETUP] appear.
3
Press X/x to select [CUSTOM], then
press
The Setup Display appears.
4
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
78
GB
Downloaded From TheatreSystem-Manual.com Manuals
Set this between –6.0 dB and +6.0
dB in 1.0 dB increments.
Set this between –6.0 dB and +6.0
dB in 1.0 dB increments.
DISPLAY when the system is
[SETUP],
.
.
5
Press X/x repeatedly to select [TEST
TONE], then press
6
Press X/x repeatedly to select [ON],
then press
You will hear the test tone from each
speaker in sequence.
7
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
The test tone is emitted from only the
speaker which you are adjusting.
8
Press
making adjustments.
9
Press X/x repeatedly to select [TEST
TONE], then press
10
Press X/x repeatedly to select [OFF],
then press
Note
• When you adjust the speaker settings, the sound cuts
off for a moment.
• The test tone signals are not output from the HDMI
OUT jack.
or
or c.
.
when you have finished
.
.

Advertisement

Table of Contents

   Also See for Sony DAV-DZ720

   Related Manuals for Sony DAV-DZ720

Comments to this Manuals

Symbols: 0
Latest comments: