Step 4: Performing The Quick Setup - Sony DAV-DZ720 Operating Instructions Manual

Dvd
Hide thumbs Also See for DAV-DZ720:
Table of Contents

Advertisement

Step 4: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
"/1
C/X/x/c,
DISPLAY
1
Turn on the TV.
2
Press [/1.
Note
• Disconnect the headphones when you perform
the Quick Setup. You cannot operate steps after
10 with the headphones connected.
• Make sure that the function is set to “DVD.”
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [
] to run QUICK SETUP.]
ENTER
appears at the bottom of the screen. If this
message does not appear, display the Quick
Setup and perform again (page 18).
4
Press
without inserting a disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
LANGUAGE SETUP
OSD:
ENGLISH
ENGLISH
MENU:
FRENCH
AUDIO:
SPANISH
SUBTITLE:
PORTUGUESE
5
Press X/x to select a language.
The system displays the menu and subtitles
in the selected language.
6
Press
.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SCREEN SETUP
16:9
TV TYPE:
16:9
HDMI RESOLUTION:
YC
C
/RGB (HDMI):
4:3 LETTER BOX
B
R
COLOR SYSTEM (VIDEO CD):
4:3 PAN SCAN
SCREEN SAVER:
ON
BACKGROUND:
JACKET PICTURE
BLACK LEVEL:
ON
BLACK LEVEL
OFF
(COMPONENT OUT):
4:3 OUTPUT:
FULL
7
Press X/x to select the setting that
matches your TV type.
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
(page 72)
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 72)
8
Press
.
The Setup Display for selecting the speaker
formation appears.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned, then press
.
For details, see “Getting Optimal Surround
Sound for a Room” (page 66).
SPEAKER FORMATION
STANDARD
continued
Page 17
GB

Advertisement

Table of Contents
loading

Table of Contents