• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the "Dolby
Pro Logic," "Dolby Pro Logic II MOVIE," or "Dolby Pro Logic II MUSIC" sound field (page 30).
3 Connecting the Antenna (Aerial)
To connect the AM antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
Remove only the loop part from the plastic stand.
Set up the AM loop antenna (aerial).
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
• Do not place the AM loop antenna (aerial) near the system or other AV equipment, as noise may result.
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
Downloaded From TheatreSystem-Manual.com Manuals
Plastic stand (supplied)
Insert until this
Insert the cords pushing
down the terminal clamp.