Presetting Radio Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
Press FUNCTION +/– repeatedly until
"TUNER FM" or "TUNER AM" appears
in the front panel display.
Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. "TUNED" and "ST" (for stereo
program) appear in the front panel display.
Press X/x repeatedly until "MEMORY"
appears in the front panel display.
A preset number appears in the front panel
Press X/x to select the preset number
The station is stored.
Repeat 1 to 7 to store other stations.
To change the preset number
Restart from Step 1.
Downloaded From TheatreSystem-Manual.com Manuals
To change the AM tuning interval
(except for Russian and Middle
The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the system. While holding down
> (on the system), press "/1 on the system to
turn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.