Basic Operations; Playing An Input Source Equipment; Start Playback - Sony HT-M7 Operating Instructions Manual

4
Press V/v repeatedly to select
"AUTO xxx * ".
The test tone is output from each speaker
in sequence.
* xxx represent a speaker channel.
5
Adjust the speaker levels and
balance.
Use the LEVEL menu (page 49) to adjust
the speakers to have the same sounding
test tone level for each speaker.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
panel during adjustment.
6
Exit test tone.
Press any input buttons or select "OFF"
under step 4.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
• The MASTER VOLUME may has set to
"VOL MIN".
32
US

Basic Operations

Playing an input source
equipment
,
V/v/B/b
MASTER
VOL +/–
MUTING
1
Press the input button which
corresponds to the equipment
you want.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display
panel.
2
Turn on the equipment and

start playback.

Input
buttons
MOVIE,
MUSIC,
GAMING
AMP
MENU