HP Z440 Workstation Series Maintenance And Service Manual page 39

Heading Option
USB Device Control
Slot Settings
System Security
Advanced Boot Options
Description
Set workstation USB ports to Enabled/Disabled:
●
Front USB Ports
●
Rear USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
●
Internal USB Ports
◦
USB Port 1
◦
USB Port 2
◦
USB Port 3
Lets you enable or disable any PCIe slot.
Provides these options:
●
Virtualization Technology (VTx)—Enables or disables Intel Virtualization
Technology to increase workstation performance. (Only visible on supported
processors)
●
Virtualization Technology Directed I/O (VTd)—(Enabled or Disabled) Controls the
underlying processor and chipset features needed to support a virtual appliance.
●
Trusted Execution Technology—(Disabled/Enabled) Turns Intel TXT feature on or
off.
●
OS Management of Embedded Security Device—Enables or disables the ability of
the operating system to control the TPM device, including turning it on and off,
initializing it, and resetting it.
◦
Reset of Embedded Security Device through OS—Enables or disables the
ability of the operating system to reset the TPM. Available only when OS
Management of Embedded Security Device is enabled.
◦
No PPI provisioning
◦
Allow PPI policy to be changed by OS
Enables you to configure the boot order by physically reordering the menu entries. The
following is the default boot order presented in the menu:
●
UEFI Boot Sources
◦
OS-specific Boot Manager
◦
ATAPI CD/DVD Drive
◦
USB Floppy/CD
◦
USB Hard Drive
◦
Hard Drive (may only appear if the device has an EFI boot file on it)
●
Legacy Boot Sources
◦
ATAPI CD/DVD Drive
◦
USB Floppy/CD
Computer Setup (F10) Utility 29