Initial Settings; Easy Data Transfer Support - Docomo F-02E Arrows X Instruction Manual

2
On the physical keyboard, select a keyboard
[Set up keyboard layouts] Mark a keyboard
layout Select a keyboard layout

Initial settings

You can set necessary items collectively for the first time to
use the terminal.
Each setting can be changed anytime.
1
From the Home screen,
[Initial settings]
2
Set each item
Slide-in function : Set a function which allows you to
activate an application by sliding your finger from the
edge of the screen and to capture screen as an image.
P114
Screen lock auth : Set whether to activate screen lock
authentication. P104
Security unlock preference : Set unlocking method for
authentication screen lock. P105
Easy data transfer support : Move data of a mobile phone
using a microSD card.
❖

Easy data transfer support

Move mobile phone data saved on a microSD card to the
terminal.
Move data of phonebook, redialing/incoming history,
schedule, bookmark, alarm, received/sent/unsent mails.
1
✔INFORMATION
[Settings]
❖
Set the following items as required in addition to the initial
setting items.
45
From the Home screen,
[Initial settings] [Easy data transfer support]
Check guidance for each data moving location and tap
[OK]. Then follow the onscreen instructions.
If you do not want to display a guidance for moving
location next time, mark [Don't display this screen
again.] before tapping [OK].
To view moved received/sent/unsent mails, from the
Application menu, tap [sp-mode mail]
select the location.
To display the moved schedule, synchronize with the account
on the moved location. The last registered Google account is
set as an account to move to.
On some mobile terminals which do not support Easy data
transfer support, part of data cannot be moved.
About other initial settings
Google account setup etc. P117
Email account settings P70
Wi-Fi functions settings P86
Access point (APN) settings P84
Switching to English display P115
[Settings]
[Import] to
Before using the terminal